Events and notifications - NAO

Created by Support Team, Modified on Thu, 28 Oct, 2021 at 11:57 AM by Hervé FRANCO

You may receive notifications from NAO system or from an application.

In that case, a small sound is played and the status LEDs remain still white but blink once in a while with a colour indicating the severity of the notification.


Error and Warning notification messages are prefixed by their severity and their ID when they are said, so that you can give them to the customer support to describe more easily your problem.


  • examples:
    1. Warning 801, my battery will soon need charging.
    2. Error 803, my battery is totally empty. I’m shutting down.
    3. Error 722, I can’t move anymore. Some of my motors are too hot in my Right Arm. Please let me rest for a while.



List of notifications

Boot process

#MessageTipsSeverity
10I canceled my system update. The system image was invalid. I am still running version < x.y.z >.The file containing the system image seems unusable, try again to retrieve the relevant system file.red_chest
11
100

I successfully updated my system.

I am now running version < x.y.z >.

green_chest
101

I canceled my system update. The system image was not compatible with my upgrade program.

I am still running version < x.y.z >.

The system image used for the update is not compatible with your robot hardware. Check what system image version supports your robot version and model, and retry with one of the supported system image version.red_chest
102I canceled my system update. The system image was not compatible with my processor. I am still running version < x.y.z >.
103I canceled my system update. The system image was not compatible with my body. I am still running version < x.y.z >.
104I canceled my system update. The system image was corrupted. I am still running version < x.y.z >.The system image is corrupted. Try downloading it again then restart the update process.red_chest
105

I canceled my system update.

My current system seems corrupted. I am still running version < x.y.z >.

The update program cannot recognize your robot hardware. Some changes done on the hardware damage it. Contact the support.red_chest
110I could not update my system. Try to update me again.red_chest
111
120

I successfully completed my factory reset.

All my data and settings have been reset.

green_chest
200

I couldn’t complete my factory reset.

I may still have some data or settings from before.

Retry a factory reset to remove all my data and settings.

Retry the update with factory reset enabled.

If the problem persists, contact the support.

red_chest
201
202
203I successfully completed my factory reset. All my data and settings have been reset.green_chest
204

I can’t access some of my data.

My user partition seems corrupted. Please try to reboot me to fix the problem.

The memory space dedicated to the user is not accessible due to some hardware failure.

Try to reboot the robot.

If the problem persists, contact the support.

yellow_chest
205
214

I can’t access some of my data.

My internal partition seems corrupted. Please try to reboot me to fix the problem.

The memory space dedicated to internal usage is not accessible due to some hardware failure.

Try to reboot the robot.

If the problem persists, contact the support.

yellow_chest
215
400I can’t move. My current system is not compatible with my body. Retry to update me with a compatible system image.The current system image of your robot is not compatible with your robot hardware. Check what system image version supports your robot version and model, and retry with one of the supported system image version.red_chest
401I can’t move. My current system is way too old for my body. Retry to update me with a more recent system image.
402I can’t move. My current system is way too recent for my old body. Retry to update me with a less recent system image.
404I can’t move. I can’t access my body. Please try to reboot me to fix the problem.

The head does not find or recognize its body. The robot is unusable.

Try to reboot to fix this.

red_chest
405

I updated some of my firmwares.

Please reboot me to finish the update.

Some new firmwares have been installed but will not be enabled until a reboot of the robot.

Turn off the robot using the standard procedure, then start it again.

If this warning occurs on every boot, it means:

  • either some hardware is too old and cannot be updated;
  • or some hardware is broken and cannot be updated.

In either case, you should contact the support.

yellow_chest
500I can’t connect to the cloud services. My head identifier is missing. Please contact support.Contact the support.red_chest
501I can’t connect to the cloud services. My system date is wrong. Please ensure that I am connected to the Internet and reboot me to fix the problem.Make sure your robot is connected to the Internet then restart it to update the date.yellow_chest
600I’m not safe like this. Please help me sit or crouch.The robot is not in a good position to start autonomous life. Put it in sitting or crouching position and it will start life.red_chest

Diagnosis - NAO 

#MessageTipsSeverity
710I can’t move anymore. I detected an error on <X> of my vital devices: < list of devices >. Please try to reboot me to fix the problem.

This will have an impact on your robot.

If the problem persists after a reboot, contact the support.

red_chest
711I detected an error on <X> of my devices: < list of devices >. Please try to reboot me to fix the problem.yellow_chest
712I detected a system error: one of my software does not run properly. Please try to reboot me to fix the problem.

If the problem persists after a reboot,

contact the support.

red_chest
713I can’t move anymore. I detected an error on <X> of my vital devices: < list of devices >. Please try to reboot me to fix the problem.

This will have an impact on your robot.

If the problem persists after a reboot, contact the support.

red_chest
714I detected an error on <X> of my devices: < list of devices >. Please try to reboot me to fix the problem.yellow_chest
720Some of my motors are getting hot in my <chainName wheel or sensor>. I will need to rest soon.Robot motors are getting hot or are already too hot to be able to move. Put the robot in crouch and unstiffened and wait for few tens of minutes to let its motors cool down before you can use it again.yellow_chest
721

A part of my body cannot move anymore. Some of my motors are too hot in my <limbName>.

Please let me rest for a while.

722I can’t move anymore. Some of my motors are too hot in my <limbName>. Please let me rest for a while.red_chest
723Some of my motors are getting hot in my <chainName wheel or sensor>. I will need to rest soon.yellow_chest
724Some of my motors are too hot in my <limbName>. Please let me rest for a while.
725My memory seems full. Please reboot me to fix the problem.Robot RAM is full. Reboot the robot.yellow_chest
726My memory seems full. Please remove some applications or data to make some room.Robot user partition is full. Remove some applications or some data.yellow_chest
730My head processor is getting hot. I will need to rest soon.Robot head processor is getting or is already too hot. Shut down the robot for few tens of minutes.yellow_chest
731My head processor is too hot. Please let me rest for a while.red_chest

Battery - notifications

#MessageTipsSeverity
800I can’t access my battery. Please try to reboot me to fix the problem.If the problem persists after a reboot, contact the support.red_chest
801My battery will soon need charging.The battery level reached 30%.yellow_chest
802My battery needs urgent charging.The battery level reached 15%.yellow_chest
803My battery is totally empty. I’m shutting down.The robot ran out of battery so it shut down.red_chest
805My battery is now fully charged.green_chest
806I detected an unusual temperature on my battery. I’m shutting down. Please let me rest for at least 2 hours before rebooting me.If the problem persists after 2 hours with the robot off, contact the support.red_chest
810I failed to leave my charging station. Please help me to move away from it.red_chest


NAO Apps Store - notifications

#MessageTipsSeverity
830I have installed < Name of the applications >.green_chest
832I have updated < Name of the applications >.green_chest
834I have removed the application < Name of the applications >.green_chest
840I have downloaded system version < x.y.z >. Reboot me to install it.yellow_chest


Robot backup tool - notifications

#MessageTipsSeverity
900I successfully backed up my data.green_chest
901I couldn’t back up my data. My system version is not compatible with this operation. Please try to update me with a more recent version and try again.red_chest
902I couldn’t back up my data. The files were not readable. Please try again.red_chest
903I couldn’t back up my data. Connection with back up application was interrupted. Please ensure that I am connected to the network and try again.red_chest
920I successfully restored my data.green_chest
921I couldn’t restore my data. My system version is not compatible with this operation. Please try to update me with a more recent version and try again.red_chest
922I couldn’t restore my data. The files were not writable. Please try again.red_chest
923I couldn’t restore my data. Connection with back up application was interrupted. Please ensure that I am connected to the network and try again.
red_chest

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article