NAO - How to connect to a WiFi network ?

Created by Herve Franco, Modified on Tue, 08 Mar 2022 at 03:55 PM by Herve Franco

This article explains how to connect NAO to a WiFi network.


Table of content:



WITH ROBOT SETTINGS
  • Turn your NAO on by pressing the chest button.


  • Connect an ethernet cable to the head (remove the hatch if necessary).
  • Click "CONNECT" in the "Connect to a robot" section.
  • If your NAO appears in the list, click on its line, the connection will be established.
  • If it doesn't appear in the list:
    • press the chest button so NAO will say its IP address,
    • Click "MANUALLY ADD A NAO" button,
    • type the Ethernet connection IP address and click "CONNECT".

  • Once the connection is established, click the WIRED button.


  • In the list select the network you want to connect to.

  • If necessary fill in the network password and click "CONNECT".


  • You are now connected to the WI-FI network ("Connected" appears under the network name).
  • From this point you can click on the network name to display the WiFi IP address.


  • Or you can simply disconnect the ethernet, wait a few second (to let NAOqi switch to the wireless setup) and press the chest button once to make the robot say the IP address.




WITH THE NAO WEBPAGE

  • Turn your NAO on by pressing the chest button.


  • Connect an ethernet cable to the head (remove the hatch if necessary).
  • Once the boot process is complete press the NAO chest button once to get the robot IP address.


  • Type this IP address in any browser to access the webpage.


  • Fill in the login and password (by default both are "nao").


  • Click "Connect".
  • Now in the main page, click on the second round icon from the left to access the NETWORK SETTINGS page.
  • Select the network you want to connect to.
  • Fill in the password and click "Connect".
  • You are now connected to thWI-FI network ("Connected" appears under the network name).
  • From this point you can click on the network name to display the WiFi IP address.


  • Or you can simply disconnect the ethernet, wait a few second (to let NAOqi switch to the wireless setup) and press the chest button once to make the robot say the IP address.




Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us how can we improve this article!

Select atleast one of the reasons

Feedback sent

We apprciate your effort and will try to fix the article