This article explains how to connect NAO to a WiFi network.


Step 1:

  • Turn the NAO on by pressing the chest button and connect an ethernet cable to the robot.

Step 2:
  • Once NAO boot process is complete press the NAO chest button once to get the robot IP address.


  • Then type this IP address in any browser to access the NAO webpage.


  • Fill in the login and password (by default both are "nao") and click "Connect".




Step 3:
  • Now in the main page, click on the second icon from the left to access the NETWORK SETTINGS page 



Step 4:

  • Select the network you want to connect NAO, fill in the password and click "Connect":

  • You are now connected to the wifi network ("Connected" appears under the network name)

  • From this point you can click on the network name to display the WiFi IP address :


  • Or you can simply disconnect the ethernet, wait a few second (to let NAOqi switch to the wireless setup) and press the chest button once to make the robot say the IP address.