Ihre Privatsphäre
We use cookies to give you a better experience in United Robotics Group
In unserer Datenschutzrichtlinie erfahren Sie mehr darüber, welche Art von Cookies wir verwenden, warum und wie. Da wir Ihr Recht auf Privatsphäre respektieren, können Sie einige Arten von Cookies ablehnen. Klicken Sie auf die verschiedenen Kategorieüberschriften in unserem Cookie-Banner, um unsere Standardeinstellungen zu ändern. Das Blockieren einiger Arten von Cookies kann jedoch Ihre Erfahrung mit der Website und den Diensten, die wir anbieten können, beeinträchtigen. Weitere Informationen finden Sie in unserem Link zur Datenschutzrichtlinie unten.
Unbedingt erforderliche Cookies
Diese Cookies sind für das Funktionieren der Webseite erforderlich und können in unseren Systemen nicht abgeschaltet werden, speichern jedoch keine personenbezogenen Daten. Sie werden normalerweise als Reaktion auf Ihre Aktionen gesetzt, die eine Anfrage nach Diensten auslösen, wie z. B. das Festlegen Ihrer Datenschutzeinstellungen, das Anmelden oder das Ausfüllen von Formularen. Sie können Ihre Browsereinstellungen ändern, um Sie über diese Cookies zu informieren, aber einige Teile der Webseite funktionieren möglicherweise nicht.
Cookies ansehen
Yesterday we started Pepper Robot and it turned on fine. Then we shut it down and unlocked the head panel to connect the ethernet cable to its head. But when we tried to turn it back on(after connecting ethernet) it wouldn't turn on at all. There were no lights blinking/flashing of any sort.
We removed the cable, put the panel back on and then tried to turn it on but no luck. We tried to hold the "power button" for 4/6/10 seconds but no blinking of any sort happend. We tried to double tap the "power button" but still nothing happened.
We made sure that:
* Stop button is unlocked
* It was connected to the power source, so the battery shouldn't be an issue.
Is there anything that anyone can suggest
3 Stimmen
8 Kommentare
Soztag-lab gepostet 5 Monate her
sorry to hear that. I fear you should send it to maintenance.. Kind regards and at Service, T.B
0 Stimmen
Jan. leusmann gepostet 6 Monate her
We have the exact same problem right now. We also tried to access the ethernet slot by removing the head and only found out afterwards that the ethernet port ist at the back of the head. We attached the head back on. Since then pepper does not turn on anymore. We have tried basically every possible configuration.
- Re-attaching the head multiple times.
- Power Cable connected / not connected
- Ethernet Cable connected / not connected
- Stop button is unlocked
- Pepper is charged
The only reproducable behaviour we are getting is that when we long press the power button for 4 seconds, the blue shoulder lights turn on. However, nothing happens afterwards.
Any ideas?
0 Stimmen
Jan. leusmann gepostet 6 Monate her
We have the exact same issue. We also removed the head to access the ethernet cable (we found out afterward that the access point is at the back of the head). After putting it back on, pepper does not turn on anymore. We have tried this in basically every possible configuration, and the only reproducible behavior we get is that the blue shoulder lights turn on after we press the power button for around 4 seconds. However, nothing happens afterward.
0 Stimmen
Soztag-lab gepostet 6 Monate her
Glad to hear it! Kind regards and at Service, T.B
0 Stimmen
Unitedrobotics gepostet 6 Monate her
Hey, Yes the problem was resolved. I removed the head and placed it back again and it started to work.
0 Stimmen
Soztag-lab gepostet 6 Monate her
Hey wanted to check again :) ? Kind regards and at Service, T.Batbayar
0 Stimmen
Soztag-lab gepostet 6 Monate her
Hey, already something done yet? Kind regards and at Service, T.B
0 Stimmen
Soztag-lab gepostet 6 Monate her
Sorry to hear from that! Is it a problem? Already solved? Don't give up!
Kind regards, TB for NCT Nürnberg
0 Stimmen
Anmelden oder Registrieren um einen Kommentar zu veröffentlichen