Votre vie privée
We use cookies to give you a better experience in United Robotics Group
Vous pouvez en savoir plus sur le type de cookies que nous utilisons, pourquoi et comment dans notre politique de confidentialité. Parce que nous respectons votre droit à la vie privée, vous pouvez choisir de ne pas autoriser certains types de cookies. Cliquez sur les différentes rubriques de catégories dans notre bannière de cookies pour modifier nos paramètres par défaut. Cependant, le blocage de certains types de cookies peut avoir un impact sur votre expérience du site et les services que nous sommes en mesure d'offrir. Pour plus de détails, consultez notre lien Politique de confidentialité ci-dessous.
Cookies strictement nécessaires
Ces cookies sont nécessaires au fonctionnement du site Web et ne peuvent pas être désactivés dans nos systèmes, mais ne stockent aucune information personnelle. Ils sont généralement définis en réponse à vos actions qui déclenchent une demande de services, telles que la définition de vos préférences en matière de confidentialité, la connexion ou le remplissage de formulaires. Vous pouvez modifier les paramètres de votre navigateur pour vous alerter de ces cookies, mais certaines parties du site Web peuvent ne pas fonctionner.
Afficher les cookies
Yesterday we started Pepper Robot and it turned on fine. Then we shut it down and unlocked the head panel to connect the ethernet cable to its head. But when we tried to turn it back on(after connecting ethernet) it wouldn't turn on at all. There were no lights blinking/flashing of any sort.
We removed the cable, put the panel back on and then tried to turn it on but no luck. We tried to hold the "power button" for 4/6/10 seconds but no blinking of any sort happend. We tried to double tap the "power button" but still nothing happened.
We made sure that:
* Stop button is unlocked
* It was connected to the power source, so the battery shouldn't be an issue.
Is there anything that anyone can suggest
3 Votes
8 Commentaires
Soztag-lab publiés 5 mois il y a
sorry to hear that. I fear you should send it to maintenance.. Kind regards and at Service, T.B
0 Votes
Jan. leusmann publiés 6 mois il y a
We have the exact same problem right now. We also tried to access the ethernet slot by removing the head and only found out afterwards that the ethernet port ist at the back of the head. We attached the head back on. Since then pepper does not turn on anymore. We have tried basically every possible configuration.
- Re-attaching the head multiple times.
- Power Cable connected / not connected
- Ethernet Cable connected / not connected
- Stop button is unlocked
- Pepper is charged
The only reproducable behaviour we are getting is that when we long press the power button for 4 seconds, the blue shoulder lights turn on. However, nothing happens afterwards.
Any ideas?
0 Votes
Jan. leusmann publiés 6 mois il y a
We have the exact same issue. We also removed the head to access the ethernet cable (we found out afterward that the access point is at the back of the head). After putting it back on, pepper does not turn on anymore. We have tried this in basically every possible configuration, and the only reproducible behavior we get is that the blue shoulder lights turn on after we press the power button for around 4 seconds. However, nothing happens afterward.
0 Votes
Soztag-lab publiés 6 mois il y a
Glad to hear it! Kind regards and at Service, T.B
0 Votes
Unitedrobotics publiés 6 mois il y a
Hey, Yes the problem was resolved. I removed the head and placed it back again and it started to work.
0 Votes
Soztag-lab publiés 6 mois il y a
Hey wanted to check again :) ? Kind regards and at Service, T.Batbayar
0 Votes
Soztag-lab publiés 6 mois il y a
Hey, already something done yet? Kind regards and at Service, T.B
0 Votes
Soztag-lab publiés 6 mois il y a
Sorry to hear from that! Is it a problem? Already solved? Don't give up!
Kind regards, TB for NCT Nürnberg
0 Votes
Connexion ou S'inscrire pour poster un commentaire